Solar Products

Solar PCU - Aarush+

  • DSP Based
  • Highly Ruggedness
  • User settable all parameters
  • Inbuild MPPT
Download Brochure

Solar Hybrid Inverter (Power Conditioning Unit)

Asolar Hybrid Inverter (PCU) can benefit the home in a variety of ways. Depending on the size, it can allow an establishment to remain unaffected in the event of power failure. It can also be used to simply cut the costs of daily energy use. Ideal for usage in homes, shopes, Hospitals, Banks, schools etc.

The Power Conditioning unit, ensures maximum utilization of solar by prioritizing the control process. The panels usually bigger in size charges the battery enough to take care of not only backup during power failure; but also the entire load during night. The inverter automatically disconnects the EB/Mains power supply and the inverter supplies the entire power to the load, saving electricity.

Working of Solar Hybrid Offline Inverter

  • DSP based; less components, small size less electricity bill more efficiWhen Solar energy is sufficient then total o/p load will operate on solar through MPPT & Inverter Excess solar power will charge batteries.
  • When solar energy is weak then inverter is taking DC source from solar & balance from batteries. When batteries reach TO SET discharge level (50%% kept as a bufferas diffault) the o/p load is shifted to grid and change over time will be 1 to 2 seconds.
  • After shifting load to grid (bypass) the batteries are charged from solar energy and if solar energy not sufficient to charge the batteries, then remaining DC power is taken from grid chargers.if grid charger is on.
  • Once the batteries are fully charged from solar to set level and solar is present then load is shifted back to inverter from grid.
  • If grid supply is not present then again load is shifted to inverter to use buffer battery backup When grid returns during inverter which is working on buffer battery backup then the load is shifted to grid & batteries are charging through solar or grid

Features

  • DSP based; less components, small size less electricity bill more efficiency.
  • Soft Start features; protects appliances at start up.
  • Last Fault Display and record : the system records the last fault and you can analyze it.
  • Adaptive loss reduction process gives more efficient charging system.
  • 5 stag battery charge control system for lower gassing and faster Charging
  • In built SBM (Smart Battery Management) system to provide higher degree battery production & life
  • Battery usage data is recorded for better evaluation of battery.
  • Supply the highest quality pure sine wave power; protects your expensive household appliance & sensitive office equipments.
  • Musical Alarm
  • Highly cost effective design with special features to safeguard the mosfets to poor electrical quantity.
  • Over load and D.C. low protection
  • Software controlled Auto self testing
  • Fully computer friendly UPS operation.
  • Intelligent Auto sense; continuously monitors health of system.
  • AC input low & high voltage cut off protections in both, invertor & U.P.S.modes.
  • Silent operation of fans, tube light or appliances.
  • Quick Change over from Mains to inverter mode.
  • Software controlled Auto reset feature for over load, Short ckt & low battery.
  • Very low no load current for prolonged battery operation under standby.
  • Cooling fan improves reliability of system.

Specifications

Model 5.5KVA-8KVA 10KVA-12.5KVA 15KVA-30KVA 50KVA-100KVA
Rating 5.5KVA-8KVA 10KVA-12.5KVA 15KVA-30KVA 50KVA-100KVA
DC Voltage 96V/120V 120V/192V 192V/360V 360V
Solar Voltage Range 120V-180V 144V-200V 144V-200V 240V-350V 240V-350V 400V-500V 400V-500V
Charge Controller MPPT based Charge Controller
MPPT Rating KVA = kW (Customized as per requirement)
Grid charger Rating 10 A
Grid Input Single Phase/Three Phase
Grid Voltage Range 180V-270V or 360V - 470V
Type of Inverter IGBT based PWM Inverter
O/P Waveform Pure Sinewave
O/P Power Capacity 1kVA-100kVA (@ Output PF 0.8)
O/P Voltage 230 = 2% (1-phase), 415 = 2% (3-Phase)
Frequency 50Hz
T.H.D <3% on Linear Load, <5% on Nonlinear Load
O/P P.F 0.8 lagging to Unity
Inverter Efficiency >90%
Overload Capacity 100%-120% for 30sec, 125%-150% for 0 sec
Change Over Time 2 sec
Duty Cycle Continuous
Operating Mode Hybrid Offline
Noise 50dB at 1m distance
Operating Temperature 0-50 Deg. Celsius
Storage Temperature -10 Deg. Celsius to 55 Deg. Celsius
Humidity 95% (Non Condensing)
Altitude <1000m above sea level
Enclosure Protection IP20 or IP21
Cooling Forced Air Cooling
Color Grey + White
Cable Entry Bottom Rear Side
Dimensions 470mm(L) X 710(W) X 650mm(H)-5kVA
600mm X 1000mm X 950mm - 10kVA-30kVA
850mm X 1420mm X 1200mm - 50kVA-150kVA
Weight 85kg (5kVA)
128kg - 300kg (10kW-30kVA)
460kg - 570kg (50kVA-100kVA)
Metering Solar Voltage
Solar Current
Solar Power		 O/P Voltage
O/P Current		 Grid Voltage
Grid Current		 Battery Voltage
Battery Status
Frequency
Faults Display O/P Under
O/P Over		 DC Under
DC Over		 O/P Overload
Over Temperature*
Short Circuit
Protections MCB at Grid
MCB/FUSE at
Array Fuse
at Battery		 Battery Reverse Polarity*
Array Reverse Polarity*		 AC Over AC
Under DC Over
DC Unde		 Over Temperature*
Overload
Short Circuit
Above Protections with Alarm
Pre Alarm Overload & Battery Low

*Due to continous improvements actual specifications may change without prior notice

Download Brochure