Power Products

servo-stabiliser

Smart On Line UPS

- Double conversion online UPS
- Input power factor near unity
- Low Input current distortion
- Active power factor correction
- High efficiency
- Inbuilt galvanic isolation transformer
- Advanced network connectivity
- IGBT based design

Optional

  • Redundant UPS for 24X7 operation (hot standby and load sharing)
  • Harmonic filter at the UPS input (Active / Passive)
  • Mobile Connectivity
  • RS 232 / Remote Monitoring

Technical Specifications: SMART (ONLINE UPS 1ph-1ph)

Capacity 5KVA 6KVA 7.5KVA 10KVA
Technology DSP with IGBT
DC Bus 120V/192V 120V/192V 192V/240V 192V/240V
Input
Input Voltage 230V AC Single Phase
nput Power Factor @ 100% Load 0.99
Input current harmonic distortion (THD) < 10%
Input Voltage Window 170-270V
Input Frequency 50Hz+10%
Rectifier IGBT based Full bridge
Voltage Regulation (+)1%
Charger Type CVCC
Output
Inverter Type MPWM with instantaneous sine wave control using MOSFET
Power Factor 0.8 lag
Nominal Voltage 230V Single Ø
Regulation ( ± ) 1%
Frequency 50Hz ± 1Hz
Total Harmonic Distortion <2% for linear load, <6% for non linear load
Over Load Capacity 125% -1 Minute : 150% 5 Seconds
Transient Response Remains within +/- 5% & recover to normal within 20 msec
Nominal output current 16 A 19.2 A 24 A 32 A
Crest Factor 3:1
Mode of Operation Designed for Continuous operation
Environmental
Acoustic Noise level <60db @ 1.5 meter
Ambient Temperature 0 to 40°C
Humidity Up to 95% RH Non condensing
Altitude <3000 Feet above sea level (without derating)
Efficiency
Efficiency - 100% load 87%
Converter Protection Advanced Electronic Protection for device safety backed up with MCB’s & fast acting fuses
Isolation True Online with complete galvanic isolation for comprehensive power protection
Inverter Protection Advanced Electronic Protection for device safety, backed up with MCB’s & fast acting fuses,high speed pulse by pulse electronic device protection, over voltage or under voltage protection, Electronic over current trip with rest.
Physical
Enclosure Protection IP-20
Cooling Forced Air
Cable Entry Back side bottom
Dimensions (D x H x W) 530x550x210mm 530x550x210mm 530x550x210mm 640x660x240mm
Weight 45Kg 45Kg 55Kg 72Kg
LED Indication
  • Mains on
  • Charger on
  • Inverter on
  • Battery Low
  • Overload
  • Inverter Trip
LCD Indication
  • Input Voltage
  • Load Current
  • Output Voltage
  • Battery Voltage
Protection
  • Input Fuse
  • Input Under Voltage / Over Voltage
  • Over Temperature Protection
  • Rectifier Over Voltage
  • Battery Low protection
  • High voltage transient protection & Electrostatic discharge protection
  • Over Load protection
  • Short circuit protection
Compatibility Remote power monitoring using SNMP Software & Solar Power
Testing Standard As per IEC 62040-3

*Due to continous improvements actual specifications may change without prior notice

Download Brochure